CDM6485

Construction Machinery CDM6485H features:

This model has many optional working devices, and has strong travelling driving force. The ground clearance is high. It adopts to mining and other serious conditions. The undercarriage can be disassembled, so it’s easy to be transported.
This model is widely applied in mines and earthwork sites such as mining, road construction, railway construction and urban construction.

Strong power system
Adopt the QSM11 series engine with low noise, low emission and strong power that supports the work at high altitudes and meets Phase III waste gas emission standards of Europe and America.

Advanced hydraulic system
Adopt the double-pump double-loop negative flow control system that follows technical and intelligent electric proportional control and allows the engine and hydraulic power to be always consistent, thereby improving power utilization and fuel economy.

Excellent computer monitoring system
Set three power control modes to meet different load requirements.
Adopt the integrated electro-mechanical hydraulic technology to realize intelligent control, this technology can perform auto-diagnosis and auto-alarm display to the fault and it can provide functions of automatic idle speed, automatic engine overheating protection, auto-prompt of maintenance information and history fault log.
The multi-function monitor can fully monitor engine speed, coolant temperature, engine oil pressure and fuel level and so on.
Automatic sound warning for travel.

Multi-function comfortable luxury cab environment
The spacious and multi-function cab designed according to ergonomics enhances comfort for operator.
The luxury suspension seat can be regulated to provide optimal comfort for driver.
The mounting seat of cab adopts silicone oil & rubber material, it can both reduce the vibration and noise in the cab and greatly reduce the driver's fatigue, tremendously enhancing work efficiency.
The high-power air-conditioner and multi-hole circulating system enhance the refrigeration and heating capacity, to ensure comfortable temperature in the cab.
The cab has protective railings, so the operator is safer and more comfortable.

Convenient maintenance system
Three side doors can be opened, so that each maintenance point can be accessible when routine inspection and maintenance are performed.
• The label of maintenance point is clear and simple, convenient for operation.
• Electrical components are all arranged in the cab and the electrical control box for easy maintenance.
Walkways are increased on both sides of the platform, avoiding the trouble from ground maintenance and making maintenance easier.
The engine hood is opened a small door for the part of the engine needing maintenance, so that maintenance work becomes very convenient.

Specifications

CDM6485H

Engine

Model

CumminsQSM11

Rated power

269kW /1850 rpm

Max. torque

1674N∙M/1400rpm

Bore× Stroke

125mm × 147mm

Displacement

11.04 L

Comment

Maintain the rated power at 2300m elevation.

Operating weight

Summary

Operating weight:48200kg
The operating weight includes the weight of 7060mm standard boom,3380mm standard arm,2.2m3 standard bucket,600 mm track,lubricating oil, coolant, the full diesel oil tank and the rest standard configuration units.

Ground pressure

83 kPa

Fluid capacity

Fuel tank

655 L

Cooling system

43 L

Engine oil

40 L

Swing drive unit

7.3 L

Traveling gear

2×10 L

Hydraulic oil tank

480 L

Swing mechanism

Summary

High torque plunger motor and 2-stage planetary reducer drive.Brake inside loading motor is applied by spring and released by hydraulic unit. The automatic braking is available when the swing control lever is in neutral position.

Swing speed

9.1 rpm

Travel drive

Summary

The integrated 2-speed plunger hydraulic motor and reducer drive, motor and hydraulic pipeline are arranged inside the track frame to prevent the damage caused by the rugged road surface; The motor inside is provided with the service brake and shock absorption valve to ensure the smooth running and stop and the reliable braking.

Taveling speed

3.3 - 5.32 km/h

Gradeability

35°(70%)

MaximumTraction

382kN

Traveling mechanism

Standard track shoe width

600 mm

No. of track shoes

50 (each side)

No. of carrierrollers

2 (each side)

No. of track rollers

9 (each side)

Hydraulic system

Main pump

Duplex axial variable plunger pump

Pilot pump

Gear pump (integrated in main pump)

Max. flow of system

2×360 L/min

Max. pressure of equipment

37.2 MPa

Max. pilot pressure

3.9 MPa

Operating equipment

Each machine action is under the pilot control. The right lever controls the motion of boom and bucket while the left lever controls the arm motion and upper structure swing. The foot pilot valve is provided with the lever joystick to control the machine traveling or turning by the foot or lever. The traveling gear shift adopts the solenoid switch control.

Electrical system

System voltage:24 V
Battery:12 V,120 A×2


Transport Size
The following sizes approximate to that of the equipment of standard configuration.


The figure marked with “*” refers standard configuration.

CDM6485H

Boom Length (mm)

6300

7060 *

Arm Length (mm)

2900

3380 *

a     Transport Length(mm)

11176

12017

b     Total Transport Height(mm)

3556

3614

c     Tumblers Distance(mm)

4350

       Tail Swing Radius(mm)

3595

e     Counterweight Ground Clearance(mm)

1355

f      Track Gauge(mm)

2890 (2390)

g     Total Transport Width(mm)

3490 (2990)

h     Upper Structure Width(mm)

3710 (3160)

i      Standard Track Shoe Width(mm)

600

J     Min. ground Clearance(mm)

791

Cab Height(mm)

3313


Operating Range
The following sizes approximate tothat of the equipment of standard configuration.



The figure marked with “*” refers standard configuration.

CDM6485H

Boom Length(mm)

7060 *

6300

Arm Length(mm)

3380 *

2900

aMax. digging radius(mm)

12000

10849

b     Max. digging depth(mm)

7795

6691

c     Max. digging height(mm)

10915

10300

d     Max. dumping height(mm):

7615

7161

e     Max. digging radius on ground(mm)

11774

10623

Max. bucket breakout force-ISO(kN)

256

258

Max. arm breakout force-ISO(kN)

241

267

Standard Equipment
The following equipment items are part of the whole standard equipment of CDM6485H. In addition, the standard configuration will change along with the product modification. For more information, contact the local LONKING agent.

70 A alternator

Suspension type adjustable seat,

Platform working lamp (1)

Retractable seat belt (2" width)

Boom working lamps (2)

Ash tray and cigar lighter

Refuelling pump

Cup holder

Original Cummins engine

A/C system allowing fast defrosting

Radial seal air filter

Travel warning device

Air prefilter

Hydraulic safety lock joystick

Oil-water separator

Radio

Fuel filter

File pocket

Rippled wall radiator with cleaning space

Hat-and-coat hook

High-volume fuel tank

Left/right side storage

Auxiliary hydraulic valve (1)

Interior lighting equipment

Auto swing parking brake

Double stereo speaker

Boom/Arm holding control function

Openable skylight

Counterweight

Wiper and washer

Top bonnet

Cab positive pressure filtration and ventilation system

Gate lock and cover lock

Rear window (escape exit)

A/C stationary condenser

Escape hammer

Arm re-activation circuit

Washable rubber floor mat

Boom/Arm confluence

Fire extinguisher

Straight travelling hydraulic circuit

Color graphic display

Double speed travel

Economic mode selection

Front idler and idler cushion

Date and time display

Trailer ring on base frame

Machine state display

Chain guard rack

Working hour display, maintenance remind

Adjustable seat armrest

Current engine speed display

Aerial and harness (excluding radio speaker)

Warning message


CDM6485H Optional Equipment
The optional equipment may be different from this manual. For more information, contact the local LONKING agent.

Buckets

Operating console

Undercarriage

Auxiliary hydraulic unit and pipeline

Heavy-duty rock bucket 2.2m³

Heavy-duty rock bucket 2.5m³(Only for 6300mm length boom and 2900mm length arm)

 

Working warning lamp

700mm triple
grouser shoes

Breaking hammer pipeline

Cab roof protecting net

800mm triple
grouser shoes

Hydraulic breaking hammer

Cab front protecting net

Track rubber block